Описание
Can Bus Модул за конвертиране на цифровия в аналогов сигнал и аналогов в цифров с USB
CAN-Bus шина интерфейс многоцелевa – аларма, PDC, климатик, врати, централно закл. и много други функции които са налични в превозното средство.
Модула е в състояние да превърне CAN-Bus сигналите в аналогови изходни сигнали, както и аналогови сигнали в CAN-Bus команди. Pозволява перфектната интеграция на добавените модули и аксесоари като автомобилни аларми, имобилайзери, контрол на парктроника-PDC, климатик, врати, централно закл. и др в най-популярните автомобили. Автоматично Програмируем в превозното средство или чрез програматор C-PROG.
Програмируеми изходи и възможности за програмиране в пълният обхват на приложението и възможноста да се отговори на нуждите на клиента, индивидуално.
Can Bus Модул за конвертиране на цифровия в аналогов сигнал CANTEC-F2-U
Характеристики на продукта
Най-малък CAN-Bus модул- интерфейс в света
Съвместим с повечето популярни превозни средства
Автоматично разпознаване на превозното средство
2 програмируеми изхода с променлива полярност (+ 12V / -) 200mA
5 програмируеми изхода – маса 50mA
3 програмируеми + 12V изхода 50 mA
3 програмируеми входа – минус 1,5ma
1 програмируем вход 6-4V 1,5ma
24 различни изхода – функциите са достъпни за вашия избор
9 различни входни функции – налични
Налични програмируеми функции (изходи)
No. Описание на функциите
1 Security Constant level sign:al while the unit is in Secure mode.
2 Arming impulse 0.8 sec long impulse when the unit is armed
3 Disarming impulse 0.8 sec long impulse when the unit is disarmed
4 Trunk opening via original remote control impulse 0.8 sec long impulse on trunk opening command of original remote control
5 Original alarm system panic Constant level signal while original alarm system (if one is installed) is in alert mode.
6 Siren panic 30 sec long constant level signal when one of the zones is triggered in security mode: trunk, doors, hood opening.
7 Panic on horn from external input Impulse signal while there is an input signal on a programmable input which is defined as horn control.
8 Doors, hood and trunk Constant level signal when any of the preprogrammed doors, hood or trunk is open
9 Sensors ignoring Constant level signal while in security mode with the trunk open if it is opened with original remote control. Also the signal is formed for the time while comfort feature is active.
10 Original buttons Constant level signal when a preprogrammed vehicle button is pressed.
11 Ignition Constant level signal while ignition is on (including engine start).
12 ACC Constant level signal while vehicle ACC is on (first key position, may be congruent with ignition in some vehicles). Deactivation when the key is removed from the ignition lock.
13 Engine on Constant level signal while engine is on
14 Engine rpm Impulse signal with impulse sequence frequency proportionate to vehicle crank rotation frequency. 1 imp/sec corresponds with crank rotation frequency of 20rpm. Signal is designed for determining estimated, but not the exact rpm.
15 Transmission condition Constant level signal when the transmission is set to preprogrammed gear (P, R, N, D). For robotized transmissions the following gears can be programmed: R, N, D). For manual transmissions only R gear is available.
16 Vehicle moving Constant level signal while the vehicle speed has exceeded a certain threshold rate (varies from vehicle to vehicle but within 5-10km/h).
17 Front parking sensors activation Constant level signal for front-parking sensors activation according to chosen algorithm
18 Rear parking sensors activation Constant level signal for rear-parking sensors activation according to chosen algorithm
19 Parking distance control LED indicator Indicator the PDC system condition.
20 Movement speed Impulse signal with impulse sequence frequency proportionate with vehicle movement speed. 1 imp/sec corresponds with 1km/h speed.
21 Brake Constant level signal when the brake pedal is pressed.
22 Parking brake Constant level signal when parking brake is activated.
23 Parking lights Constant level signal when the external lights are activated.
24 Comfort timer channel Constant level signal during a certain time period (from 10 to 60 seconds) after arming the vehicle. The time is set in units of 10sec.
Налични програмируеми функции (входове)
No. Описание на функциите:
1 Central locking + Comfort Trigger input (impulse) for central locking. When input signal is >2 seconds, windows comfort closing is started. Windows“ closing stops when the signal stops. CAN-bus or alternate.
2 Central unlocking Trigger input (impulse) for central unlocking. CAN-bus or alternate.
3 Trunk opening Trigger input (impulse) for s opening the trunk lid via CAN-bus.
4 Hazard lights activation Trigger input (impulse) for hazard lights, one flash per impulse. On some vehicles, uneven lamp blinking may be observed while the impulses are fed evenly. CAN-bus or alternate.
5 Horn control Trigger input (constant) activates the programmable output function no. 7 – „panic on horn from external input“. Sound output in intervals. Stopping the input feed stops this function.
6 Engine start Engine starts via CAN-bus (only some Cadillac, Chevrolet, Hummer).
7 Central lock is locked (status) Trigger input (constant) to provide „locked“ status in vehicles where it is not available on CAN-bus (see vehicle-specific installation file).
8 Central lock is unlocked (status) Trigger input (constant) to provide „unlocked“ status in vehicles where it is not available on CAN-bus (see vehicle-specific installation file).
9 PDC control button Used for providing control of PDC (parking distance control) with optional external button (required when no „visible“ CAN-bus buttons available)..
Спецификация:
Захранващо напрежение 9-15V
Консумация 9W (стенд-бай 4 mA)
Температурен диапазон от -40 ° C до + 85 ° C
Размер (черна кутия само) 30x30x7mm
Тегло (черна кутия с проводници) 45грама
